Antioxidant effects of antioxidant biofactor on reactive oxygen species in human gingival fibroblasts

The purpose of this study was to investigate the effects of antioxidant biofactor (AOB) on reactive oxygen species (ROS). Generation of superoxide radical (O2•−) and hydroxyl radical (•OH) was determined using an electron spin resonance (ESR) spin-trapping method. AOB was added at different concentrations to these free radical generating systems. The generation of both O2•− and •OH was scavenged by the addition of AOB in a dose-dependent manner. These results indicate that AOB has strong antioxidant properties against these radicals. We further investigated the anti-oxidative effect of AOB on human gingival fibroblasts (HGFs). HGFs were treated for 3 h with α-MEM containing a combination of AOB and H2O2 (AOB + H2O2 group), containing H2O2 (H2O2 group), or containing AOB alone (AOB group). Non-stimulated HGFs were used as a control group. The number of surviving cells was in the order of the AOB group > control group > AOB + H2O2 group > H2O2 group. The level of expression of type I collagen mRNA and production of collagen were also in the order of the AOB group > control group > AOB + H2O2 group > H2O2 group. In conclusion, our results suggest that AOB may protect HGFs against oxidative stress by reducing stress-induced ROS

Stimulatory Effects of CO2 Laser, Er:YAG Laser and Ga-Al-As Laser on Exposed Dentinal Tubule Orifices

We investigated the effects of lasers irradiation on the exposed dentinal tubule. Human tooth specimens with exposed dentinal tubule orifices were used. Three types of lasers (CO2 laser, Er:YAG laser and Ga-Al-As laser) were employed. The parameters were 1.0 W in continuous-wave mode with an irradiation time of 30 s for the CO2 laser, 30 mJ in continuous-wave mode with an irradiation time of 60 s for the Er:YAG laser, and 1.0 W in continuous-wave mode with an irradiation time of 60 s for the Ga-Al-As laser. A non-irradiated group was used as a control. After laser irradiation, the dentinal surface of each sample was observed using SEM. Afterwards, all samples were immersed in methylene blue dye solution in order to evaluate the penetration of the dye solution and observe the change in dentinal permeability after laser irradiation. SEM observation showed that the control group had numerous exposed dentinal tubule orifices, whereas these orifices were closed in the laser-irradiated groups. There was consistent dye penetration into the pulp chamber in the control group, whereas no dye penetration was evident in the laser-irradiated groups. Therefore, laser appears to be a promising treatment for reducing permeation through exposed dentinal tubules

Stimulatory Effects of CO2 Laser, Er:YAG Laser and Ga-Al-As Laser on Exposed Dentinal Tubule Orifices

We investigated the effects of lasers irradiation on the exposed dentinal tubule. Human tooth specimens with exposed dentinal tubule orifices were used. Three types of lasers (CO2 laser, Er:YAG laser and Ga-Al-As laser) were employed. The parameters were 1.0 W in continuous-wave mode with an irradiation time of 30 s for the CO2 laser, 30 mJ in continuous-wave mode with an irradiation time of 60 s for the Er:YAG laser, and 1.0 W in continuous-wave mode with an irradiation time of 60 s for the Ga-Al-As laser. A non-irradiated group was used as a control. After laser irradiation, the dentinal surface of each sample was observed using SEM. Afterwards, all samples were immersed in methylene blue dye solution in order to evaluate the penetration of the dye solution and observe the change in dentinal permeability after laser irradiation. SEM observation showed that the control group had numerous exposed dentinal tubule orifices, whereas these orifices were closed in the laser-irradiated groups. There was consistent dye penetration into the pulp chamber in the control group, whereas no dye penetration was evident in the laser-irradiated groups. Therefore, laser appears to be a promising treatment for reducing permeation through exposed dentinal tubules

Comparison of Conventional and New-generation Nickel-Titanium Files in Regard to Their Physical Properties

Introduction This study investigated the surface, fractured structure, and physicochemical properties related to cyclic fatigue in various nickel-titanium (NiTi) files.Methods Among a total of 10 groups of NiTi files, conventional NiTi files (ProFile [Dentsply Maillefer, Ballaigues, Switzerland] and K3 [SybronEndo, Orange, CA]) and new-generation NiTi files (ProFile Vortex [PV; Tulsa Dental Specialties, Tulsa, OK], Vortex Blue [VB; Tulsa Dental Specialties], and K3 XF [XF; SybronEndo, Orange, CA]) with the same tip diameter (ISO size 25) and 2 types of taper (0.04 and 0.06) were used in this study. Scanning electron microscopy of the file surface structure, differential scanning calorimetry, and cyclic fatigue resistance tests were conducted.Results Many mechanical grooves were recognized on the file surface. The surface in the ProFile group was extremely smooth compared with that observed for the other files. Many shallow hollows besides mechanical grooves were noted on the surface in the XF group. A smooth curve was observed in the ProFile, K3, and PV groups. Defined peaks in differential scanning calorimetry were observed in the VB and XF groups. The 0.04 taper files exhibited a statistically higher number of cycles to fracture than the 0.06 taper files in all groups (P <.05). Cracks along the mechanical grooves were observed in the NiTi files, with the exception of the XF group. The start of cracking was detected at U-shape sites in the ProFile group, the cutting edge in the PV and VB groups, and radial islands in the K3 and XF groups.Conclusions The present findings suggest that new-generation NiTi files are not necessarily improved compared with conventional files

Heterogeneous circulating miRNA profiles of PBMAH

ObjectivePrimary bilateral macronodular adrenal hyperplasia (PBMAH), a rare cause of Cushing syndrome, is often diagnosed as a bilateral adrenal incidentaloma with subclinical cortisol production. Circulating microRNAs (miRNAs) are a characteristic of adrenocortical adenomas, but miRNA expression in PBMAH has not been investigated. We aimed to evaluate the circulating miRNA expression in patients with PBMAH and compare them with those in patients with non-functioning adrenocortical adenoma (NFA) and cortisol-producing adrenocortical adenoma (CPA).MethodsmiRNA profiling of plasma samples from four, five, and five patients with NFA, CPA, and PBMAH, respectively, was performed. Selected miRNA expressions were validated using quantitative RT-PCR.ResultsPBMAH samples showed distinct miRNA expression signatures on hierarchical clustering while NFA and CPA samples were separately clustered. PBMAH was distinguished from the adenoma group of NFA and CPA by 135 differentially expressed miRNAs. Hsa-miR-1180-3p, hsa-miR-4732-5p, and hsa-let-7b-5p were differentially expressed between PBMAH and adenoma (P = 0.019, 0.006, and 0.003, respectively). Furthermore, PBMAH could be classified into two subtypes based on miRNA profiling: subtype 1 with a similar profile to those of adenoma and subtype 2 with a distinct profile. Hsa-miR-631, hsa-miR-513b-5p, hsa-miR-6805-5p, and hsa-miR-548av-5p/548k were differentially expressed between PBMAH subtype 2 and adenoma (P = 0.027, 0.027, 0.027, and 1.53E-04, respectively), but not between PBMAH, as a whole, and adenoma.ConclusionCirculating miRNA signature was identified specific for PBMAH. The existence of subtype-based miRNA profiles may be associated with the pathophysiological heterogeneity of PBMAH

Examination of Calcium Silicate Cements with Low-Viscosity Methyl Cellulose or Hydroxypropyl Cellulose Additive

The purpose of this study was to improve the operability of calcium silicate cements (CSCs) such as mineral trioxide aggregate (MTA) cement. The flow, working time, and setting time of CSCs with different compositions containing low-viscosity methyl cellulose (MC) or hydroxypropyl cellulose (HPC) additive were examined according to ISO 6876-2012; calcium ion release analysis was also conducted. MTA and low-heat Portland cement (LPC) including 20% fine particle zirconium oxide (ZO group), LPC including zirconium oxide and 2 wt% low-viscosity MC (MC group), and HPC (HPC group) were tested. MC and HPC groups exhibited significantly higher flow values and setting times than other groups (p<0.05). Additionally, flow values of these groups were higher than the ISO 6876-2012 reference values; furthermore, working times were over 10 min. Calcium ion release was retarded with ZO, MC, and HPC groups compared with MTA. The concentration of calcium ions was decreased by the addition of the MC or HPC group compared with the ZO group. When low-viscosity MC or HPC was added, the composition of CSCs changed, thus fulfilling the requirements for use as root canal sealer. Calcium ion release by CSCs was affected by changing the CSC composition via the addition of MC or HPC

Surface changes of mineral trioxide aggregate after the application of bleaching agents: electron microscopy and an energy-dispersive X-ray microanalysis.

The aim of this study was to investigate the changes in the surface structure and chemical composition after applying bleaching agents to completely hardened mineral trioxide aggregate

Application of Reactive Oxygen Species in Dental Treatment

Reactive oxygen species (ROS) and free radicals, which have been implicated in inflammation, pain, carcinogenesis, and aging, are actually used in dental treatments such as tooth bleaching and composite resin polymerization. Recently, numerous studies have investigated the application of ROS in the medical and dental fields. In previous studies, ROS were generated intentionally through pathways such as photolysis, photocatalytic methods, and photodynamic therapy, which are used in the medical field to target cancer. In the field of dentistry, generated ROS are applied mainly for periodontal treatment and sterilization of the root canal, and its effectiveness as an antibacterial photodynamic therapy has been widely reported.. Given this background, the present article aimed to review the basic effects of ROS in dental medicine, especially endodontic therapy, and to discuss future applications of ROS